Qu-Bit Electronix Stardust Manual page 18

Functions: Secondary Functions
Shift+Inertia: Inertial Slope
Holding Shift and turning the Inertia knob will adjust the envelope peak on Inertia. The nominal
position is center on the knob.
If the knob is turned fully to the left, Inertia will only affect playback speed when decreasing, or
when the loop is paused.
If the knob is turned fully to the left, Inertia will only affect playback speed when increasing, or
when the loop is played.
Shift+Freeze: Loop Export
Holding Shift and pressing the Freeze button will export the current recording and undo buffer as
a single loop.wav file to the USB Drive. The file is formatted as a 16-bit, 48kHz stereo .wav file,
which can be reimported into Stardust.
Shift+Loop Mode: Firmware Update
Holding Shift and pressing the Loop Mode button causes Stardust to perform a firmware update.
When activated, Stardust looks for a new .bin file that does not match its current firmware version,
and uses it to update the module.
18