Advertisement
Section A - Mount IQ System Controller 3 INT
Step 6:
Open the dead front
Before removing the dead front, ensure the IQ System Controller 3 INT is completely de-energized.
WARNING:
Risk of equipment damage and electrocution. Do not wire the IQ System Controller 3 INT when it is energized.
Dead front
NOTE: The cable shown in step 1 is the cellular modem cable.
Step 1, shown above, may not be required during initial
installation as the cellular modem may not be connected.
IQ System Controller 3 INT quick install guide
Phillips screw #2
Torque: 1.4 N m
11
Advertisement
Need help?
Do you have a question about the IQ System 3 INT and is the answer not in the manual?
Questions and answers