Audio/Video Adjust - Marantz SR6005 User Manual

ENGLISH DEUTSCH

Audio/Video Adjust

The sound being played in the surround mode can be adjusted to your liking.
The items (parameters) that can be adjusted depend on the signal being input and the currently
set surround mode. For details on the adjustable parameters, see "Surround modes and surround
parameters" (vpage 83).
Menu operation
1
Press AMP to set the remote control unit to amplifier operation
mode.
2
Press MENU .
The menu is displayed on the TV screen.
3
Use ui to select the menu to be set or operated.
4
Press ENTER or p to enter the setting.
RETURN
• To return to the previous item, press
MENU
• Exiting the Menu, press while the menu is displayed.
The menu display disappears.
Items that can be set with the Audio Adjust procedure
Audio Adjust (vpage 56)
n Surround Parameter (vpage 56)
n Tone (vpage 57)
n Audyssey Settings (vpage 57)
n Manual EQ (vpage 59)
n M-DAX (vpage 59)
n Audio Delay (vpage 59)
Picture Adjust (vpage 60)
56
Remote control operation
buttons
FRANÇAIS ITALIANO ESPAÑOL
.
Move the cursor
(Up/Down/Left/Right)
NEDERLANDS SVENSKA
Audio Adjust
n Surround Parameter
Adjust surround sound parameters. It may not be possible to set this item depending on the input
signal.
Setting items
HT-EQ ON : "HT-EQ" is used.
Soften the treble range OFF : "HT-EQ" is not used.
of movie soundtracks for
better understanding.
DRC Auto : Automatic dynamic range compression on/off control according to
Compress dynamic range source. This can be set in the Dolby TrueHD mode.
(difference between loud Low / Mid / High : These set the compression level.
and soft sounds). OFF : Dynamic range compression always off.
D.Comp Low / Mid / High : These set the compression level.
Compress dynamic range OFF : Turn dynamic range compression off.
(difference between loud
and soft sounds).
LFE –10dB – 0dB
Adjust the low-frequency
For proper playback of the different sources, we recommend setting
effects level (LFE).
to the values below.
• Dolby Digital sources : "0dB"
• DTS movie sources : "0dB"
• DTS music sources : "–10dB"
C.Image 0.0 – 1.0 (0.3)
Assign center channel
signal to front left and right
channels for wider sound.
ON : Set.
Panorama
Assign front L/R signal also OFF : Do not set.
to surround channels for
wider sound.
Dimension 0 – 6 (3)
Shift sound image center
to front or rear to adjust
playback balance.
C.Width 0 – 7 (3)
Assign center channel
signal to front left and right
channels for wider sound.
Confirm the setting
Default settings are underlined.
Setting details
Return to previous menu