Chassis Rails - MSI X2-106A3R User Manual

Chassis Rails

1. The chassis rails and rack rails have
been assembled together beforehand.
The first thing to do with the rail set is to
take the chassis rails off the rack rails.
Note:
1. Only the service personnel
can slide out the rack rails.
2. The chassis rail engraved with
"RIGHT SLIDE" on the inner side
should be screwed to the right
side of the chassis whereas the
"LEFT SLIDE" should be screwed
to the left side.
2. Pull the chassis rail gently out until the locking tab locks the rail.
3. Simultaneously press down the locking tab and pull out the chassis rail. The
chassis rail should slide easily off the rack rail.
4. Follow the same procedures to disassemble the second chassis rail.
Note: The chassis rail is designed with a locking tab which can (1) hold the
system firmly to the rack, and (2) lock the system halfway without sliding out
of the rack rails.
Hardware Setup
2-29