MSI KT4A-V User Manual page 86

Digital Audio Output
When any Multi-Channel Audio Function mode is selected, you may
also connect your speakers to the Optical or Coaxial SPDIF phonejack
on the S-Bracket to exprience digital surround sound effect.
Remove the plug from the optical SPIDF phonejack before inserting
the fiber-optic cable, and read the following diagram and captions
for the function of each phonejack on the S-Bracket.
1 Optical SPDIF jack
2 Coaxial SPDIF jack
1
Plug
MSI Reminds You...
Some commonly-used audio output for-
mats (midi, wav,..etc.) may not be able
to be output from the SPDIF jacks of
the S-Bracket. To convert these audio
formats as SPDIF output:
1. Click the Volume Control icon at the
taskbar (or go to Control Panel/Sounds
and Audio Devices/Volume Control).
2. Click Properties on the Options
menu. Under Adjust volume for, click
Playback, and select the SPDIF check
box in the Show the following volume
controls list.
3. Click Advanced Controls for SPDIF
on the Options menu. Under Other
Controls, select the Sampling rate con-
version for SPDIF output check box.
4. Click Close to exit Volume Control.
Using 4- or 6-Channel Audio Function
S-Bracket
2
A-9