Security - MSI K9NU Speedster User Manual

Security

Supervisor Password Is / User Password Is
It shows the preset supervisor/user password. (read only)
Set Supervisor Password / Set User Password
Enabling Supervisor Password requires a password for entering Setup. The pass-
words are not case sensitive. Pressing <Enter> at either Set Supervisor Password
or Set User Password displays the following message:
Type the password and press <Enter>. Repeat.
Password on Boot
Choosing [Enabled] requires a password on boot. It requires prior setting of the
supervisor password. If the supervisor password is set and this option is disabled,
BIOS assumes the user is booting.
Set Supervisor Password
Enter New Password:
Confirm New Password:
BIOS Setup
[ ]
[ ]
3-19