Table of Contents
Advertisement
Chapter 1: Digital@nywhere-ATSC Hardware Installation
1.1 Package Contents
Unpack your Digital@nywhere-ATSC HDTV package and make sure that all items are included. The
following items should be included in your package:
Digital@nywhere-ATSC PCI Card
Remote control and remote sensor
Audio cable
Converter plug x 2
User Manual
Quick Guide
Installation CD
1.2 System Requirements
Pentium-IV 1.6GHz or above
256MB RAM of system memory or above
One available PCI slot
Graphics card (Must support DirectX 9.0)
Sound card (AC97 Compatible Sound Card)
1GB free HD space
CD-ROM drive (For software installation)
Microsoft Windows® XP/ MCE
(when using MCE OS an extra 3rd party DVD decoder must be installed)
1.3 Hardware Installation
Follow the steps shown below for installation of your TV card and use the pictorial guide below for
peripheral connections.
1. Turn off all power to the computer and any
attached peripherals.
2. Select an available PCI slot and remove the slot
cover, screw, etc.
3. Push the TV card firmly into the slot until it
snaps in place and secure the card by replacing
the screw you removed in step 2.
4. Replace the PC lid cover back and turn on the
power..
-2-
Advertisement
Table of Contents
