Table of Contents
Advertisement
Installation
The steps to install the PCIe 4.0 x16 Riser Cable are as follows:
⚠
Important
Please note that the illustrations below are for reference only. The placement may
vary, depending on the case and actual parts you have.
1. Turn off the main power of the computer and unplug the power cord.
2. Open the computer chassis, connect one end of the riser cable to the PCIe x16 slot
on the motherboard.
3. Unscrew or detach the PCIe bracket cover.
4. Secure the vertical bracket inside the chassis using provided standoffs and M3
5mm screws.
3
2
4
4
1
4
Advertisement
Table of Contents
