Power/Lights On And Off - Lowrance LCX-20C Operation Instructions Manual

Fish-finding sonar & mapping gps

Table of Contents

2. PAGES – Pressing this and the ← → arrow keys switches the unit

between the four different page screens. (Satellite Status Page,

Navigation Page, Map Page and Sonar Page.) Each page represents one

of the unit's major operation modes.

3. MENU – Press this key to show the menus and submenus, which

allow you to select a command or adjust a feature. This also accesses

search functions for streets, intersections, addresses and highway exits.

4. ARROW KEYS – These keys are used to navigate through the

menus, make menu selections, enter data and move the map and sonar

chart cursors.

5. ENT/ICONS (Enter & Icons) – This key allows you to save data,

accept values or execute menu commands. It is also used to create

event marker icons.

6. EXIT – The Exit key lets you return to the previous screen, clear

data and close menus.

7. WPT – (Waypoint) The Waypoint key is used to save and recall

waypoints, search for waypoints and access the waypoint list. It also

launches the Point-of-Interest (POI) search menus and is involved in

some navigation functions.

8. ZOUT – (Zoom Out) – This key lets you zoom the screen out. On the

Sonar Page, this key returns you to a full sonar chart display, showing

the entire water column from surface to bottom. On the Map Page, this

lets you see a larger geographic area on the map. Less detail is seen as

you zoom out.

9. ZIN – (Zoom In) – This key lets you zoom the screen in. On the Sonar

Page, this key enlarges fish signals and bottom detail. On the Map

Page, zooming in lets you see greater detail in a smaller geographic

area on the map.