PLEASE READ THESE INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION / MAINTENANCE
•
If a fitting is found to be damaged, cease use immediately.
•
This is a Class 3 product (Low Voltage) – no earth required.
•
12V TRANSFORMER REQUIRED – sold separately
•
This unit must be fitted by a competent and qualified electrician.
•
Install in accordance with IEE wiring regulations and current Building Regulations.
•
To prevent electrocution, switch off mains supply before installing or maintaining this fitting. Ensure other persons
cannot restore the electrical supply without your knowledge.
•
This light fitting should be connected to a circuit with a 30Ma RCD fitted. Maximum 12-15 fittings on each circuit
recommended – varies based on total cable run.
•
If replacing an existing fitting, make a careful note of the connections.
•
All connections should be made as watertight as possible to avoid electrical shortage.
•
When changing the bulb, always switch off at the mains & allow the bulb to cool before handling – LAMP WILL GET HOT
WHEN IN USE.
•
Always use the correct type & wattage of bulb. Never exceed the wattage stated.
•
The unit may get warm whilst on for a period of time.
•
12v Lighting must be wired in parallel, not series, and cable lengths kept to a minimum.
•
DO NOT PUT PRESSURE ON THE HEAD OF THE PRODUCT
Voltage: 12v (low voltage)
Max Wattage: 20w
Bulb Holder: MR11
IP Rating: IP65
Cable Length: 2 core rubber cable 0.75mm (approx. 1.4m-1.5m)
Plug Type: VERSA – Plug & Play (2 pin) - Male
Head: Adjustable
Materials: Aluminium & Tempered Glass
Finish: Black (Powder Coated)
Mount: Spike Mount or Surface Mount
Included: 1 x Spotlight, 250mm ground spike, allen key
CLEANING:
Occasional cleaning and care is recommended for this product. Please refer to our website for the best way to clean different
materials.
RETURNS & DISPOSAL:
If purchased from a 3
rd
party, please contact your supplier.
If purchased direct, contact us by phone or email:
Lumena Lights Ltd, Centre 33 Long March, Daventry, NN11 4NR
Our full returns policy is available on our website.
Waste Electrical Products should not be disposed of with household waste. Please check with your local authority or contact us
for more information. Please recycle packaging wherever possible.
AlvaLED MR11 Mini Spike Light – 12v Plug & Play
Full product range & more information: www.lumenalights.com
WARNINGS
Tel: +44 1327 871161
Producer Registration Number: WEE/KC3440XY
INSTRUCTIONS
(ALVAMR11B)
✔✔✔
3 YEAR
GUARANTEE
see website for
more details
Email: sales@lumenalights.com
Need help?
Do you have a question about the AlvaLED MR11 Mini and is the answer not in the manual?
Questions and answers