Ozito PXC PXVWDS-3625 Instruction Manual

MAINTENANCE
WARNING! BEFORE CLEANING OR CARRYING OUT
ANY MAINTENANCE PROCEDURE, ENSURE THAT
THE BATTERIES HAVE BEEN REMOVED.
Cleaning the Filter Cover
The filter should be checked at regular intervals and cleaned if necessary.
1. Open the Filter cover by pushing the
switch upwards.
2. Remove the filter cover.
3. Remove the filter pad from inside and clean
by tapping it or blowing it out.
OPEN
CLOSE
4. Assemble the cover back in place.
OPEN
CLOSE
5. Secure it by pushing the switch downwards.
Cleaning
• Keep the ventilation slots of the tool clean at all times to ensure efficient
operation.
• After each use, blow air through the tool housing to ensure it is free from
all dust, dirt, etc. Build up of dust or dirt particles may cause the tool to
overheat and shorten the life of the tool.
• If the housing of the tool requires cleaning, do not use solvents. Use of a
cloth only is recommended.
• Never allow any liquid to get inside the tool, never immerse any part of
the tool into liquid.
Storage
When not in use, the tool should be stored in a dry, frost free location, keep
out of children's reach.
Note: Ozito Industries will not be responsible for any damage or
injuries caused by repair of the tool by an unauthorised person or by
mishandling.
• If the vacuum vibrates abnormally, stop motor immediately. Abnormal
vibration usually indicates a mechanical problem continued operation
could lead to injury or damage.
Short Battery Runtime
Ensure the battery is properly charged. It will take 4-5 charging cycles
before the battery reaches optimum charge and run time.
OPEN
CLOSE
OPEN
CLOSE
OPEN
CLOSE
OPEN
CLOSE
OPEN
CLOSE
TROUBLE SHOOTING
Problem
Vacuum is not
starting
Vacuum is not
operating at
full capacity
Motor
stops while
vacuuming
OPEN
CLOSE
DESCRIPTION OF SYMBOLS
OPEN
CLOSE
l/s
OPEN
CLOSE
CARING FOR THE ENVIRONMENT
SPARE PARTS
Spare parts can be ordered from the Special Orders
Desk at your local Bunnings Warehouse.
For further information, or any parts not listed here,
visit www.ozito.com.au or contact Ozito Customer
Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: hello@ozito.com.au
Cause Remedy
Battery is low in charge Charge battery
Battery not inserted Insert battery pack correctly
properly
Possible clogging Empty the debris container and clean the
filter.
Possible clogging Empty the debris container and clean the
filter.
Battery has no power Charge battery
L
Litres per second mbar
Read instruction manual
V
Power tools that are no longer usable should not be disposed
of with household waste but in an environmentally friendly
way. Please recycle where facilities exist. Check with your local
council authority for recycling advice.
Recycling packaging reduces the need for landfill and raw
materials. Reuse of recycled material decreases pollution in the
environment. Please recycle packaging where facilities exist.
Check with your local council authority for recycling advice.
Litres
Pressure rating (millibar)
Volts