Ozito WDVB-1312 Instruction Manual

Ozito WDVB-1312 Instruction Manual

2-in-1 wet & dry vacuum / blower, 1300w 30l / 360km/h

Advertisement

2-IN-1
WET & DRY
VACUUM / BLOWER
1300W 30L / 360KM/H
INSTRUCTION MANUAL
SPECIFICATIONS
Mains Voltage:
220–240V ~ 50-60Hz
Input Power:
1300W
Max. Suction Power: 120mbar
Inlet Air Flow:
45-60L/s
Tank Capacity:
30L
Max. Air Speed:
360km/hour
Hose Diameter:
Ø64mm
Hose Length:
1.8m
Weight:
8.4kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
WARRANTY
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: valve adapters
and accessories.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
STANDARD EQUIPMENT
2-in-1 Wet & Dry Vacuum/ Blower
Angled Nozzle, Concentrator
Nozzle, Crevice Tool, Floor Tool &
2 x Extension Tubes
1.8m Hose, Foam Filter & Cartridge
Filter & Lid
Shoulder Strap & Mounting Ring,
Noise Diffuser, Blower Adaptor &
4 x Castor Wheels
WDVB-1312
0919

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WDVB-1312 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ozito WDVB-1312

  • Page 1 Shoulder Strap & Mounting Ring, Noise Diffuser, Blower Adaptor & 4 x Castor Wheels WDVB-1312 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
  • Page 2: Know Your Product

    KNOW YOUR PRODUCT SETUP & PREPARATION 2-IN-1 WET & DRY VACUUM / BLOWER 1. ASSEMBLY 1. Cord Hook 11. Angled Nozzle 2. Blower Release Button 12. Castor Wheel 3. Carry Handle 13. Vacuum Tank WARNING! ENSURE THE TOOL IS TURNED OFF 4.
  • Page 3: Filter Selection

    2. FILTER SELECTION 3. WASTE DISPOSAL Draining Liquids From The Tank WARNING! NEVER USE THE WET & DRY VACUUM CLEANER WITHOUT A FILTER. ALWAYS ENSURE Spills and puddles can be vacuumed directly into the tank with the THAT THE FILTERS ARE PERFECTLY SECURE. foam filter fitted for easy clean up and disposal.
  • Page 4 4. ATTACHING HOSES & NOZZLES Hose Outlet Selection Floor Tool Connect the suction hose to the appropriate outlet on the wet and dry The floor tool is for vacuuming vacuum, depending on the application required: solids and liquids over medium to large areas.
  • Page 5: Operation

    WARNING! ALLOW TO DRY BEFORE USE IF THE BASE OF THE BLOWER UNIT IS DAMP WHEN YOU DETACH IT FROM THE TANK LID. WDVB-1312...
  • Page 6: Maintenance

    MAINTENANCE WARNING! BEFORE CLEANING OR CARRYING OUT ANY MAINTENANCE PROCEDURE, MAKE 7. TROUBLESHOOTING SURE THAT THE TOOL IS SWITCHED OFF & DISCONNECTED FROM THE POWER SUPPLY TO PREVENT ACCIDENTAL STARTING. Symptom Possible Cause Suggested Solution Cleaning The Cartridge Filter Vacuum does not No power supply Check power cord, Clean or change the filter regularly for optimal performance.
  • Page 7: Description Of Symbols

    Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the tool by an unauthorised person or by mishandling of the tool.
  • Page 8: Electrical Safety

    ELECTRICAL SAFETY WARNING! Supply cords shall not be lighter than: When using mains-powered tools, basic safety precautions, including the following, should always be followed to reduce risk of fire, electric shock, personal injury and - if rubber insulated, ordinary tough rubber sheathed flexible cord (code designation 60245 IEC 53); material damage.

Table of Contents