Cisco 6841 Series Quick Start Manual

Your Phone
Cisco IP Phone 6841 shown.
1
`Incoming call or voicemail indicator
2
Line and feature buttons
3
Softkeys
4
Navigation
5
Hold, Transfer, and Conference
6
Speakerphone, Headset, and Mute
7
Voicemail, Applications, and Directory
8
Volume
Copyright © 2018 Cisco Systems, Inc. All rights reserved.
Cisco IP Phone 6841 and 6851 Multiplatform Phones
1
7
8
Line and Feature Buttons
Use the line and feature buttons to view calls on a line,
access features such as Speed Dial, and to perform tasks
such as resuming a held call.
Buttons illuminate to indicate status:
Green, steady: Line is idle
x
Red, steady: Line in use
x
Red, flashing: Incoming or held call
x
Amber, steady: Line is unregistered
x
Cisco 6841-51 3PCC Series | Quick Start Guide
2
3
4
5
6
Customer Service: 888-832-4976 |
Quick Start Guide
Place a Call
Enter a number and pick up the handset.
Answer a Call
Press the flashing red line button.
Put a Call on Hold
1. Press Hold .
2. To resume a call from hold, press Hold again.
View Your Recent Calls
1. Press Applications
2. Scroll and select Recents.
3. Select a line to view.
Transfer a Call to Another Person
1. From a call that is not on hold, press Transfer
2. Enter the other person's phone number.
3. Press Transfer again (before or after the party
answers).
Add Another Person to a Call
1. From an active call, press Conference
2. Enter the number you want to join and press Dial.
3. Once the call is connected, press Conference again.
Technical Support: 833-484-0404 |
.
.
.
September 2018
CustomerService@FirstLight.net