1090 Wireless USB adapter or Intel Turbo Memory
For access, remove these FRUs in order:
v "1010 Battery pack" on page 83
v "1070 Keyboard" on page 95
Table 19. Removal steps of wireless USB adapter or Intel Turbo Memory
Note: Step 1 is only for models with the wireless USB adapter. For models
with the Intel Turbo Memory Minicard, skip step 1 .
In step 1 , unplug the jack by using the removal tool antenna RF connector
(P/N: 08K7159) or pick the connector with your fingers and gently unplug them
in direction of the arrow.
When installing: In models with the wireless USB adapter, route the antenna
cable as shown in this figure and plug the cable firmly into the jack on the
adapter.
Step
Screw (quantity)
M2 × 6 mm, flat-head, nylon-coated (2)
2
2
2
1
Color
Silver
Removing and replacing a FRU
Torque
0.167 Nm
(1.7 kgfcm)
101