Warmup OCC2 Easy Instructions

Setting the time and day
Insert a pin into the hole next to the clock symbol.  Then using the ▼▲ buttons set the
time and then press the ok button (). Then set the day using the ▼▲ buttons then press
the ok button () (the days are represented by the numbers at the bottom of the screen.)
E.g. 1 would indicate Monday.
Resetting the unit
Insert a pin into the whole next the letter R. This will reset the thermostat back to the
factory settings.
Manual Mode.
In this mode the unit will turn on the heater and power up to the temperature that has
been set. It will maintain this temperature until it is switched off or the temperature has
been manually changed.
To operate the thermostat in this mode press the ok button () a temperature and a hand
() will be displayed. Using the ▼▲ buttons set the temperature you desire. Heat
indication bars will appear on the screen to indicate that the thermostat is sending power.
The unit will now operate at this temperature permanently.
Automatic Mode.
This mode executes your scheduled programming.
To operate the thermostat in this mode press the ok button ().
The  icon will be displayed and one of the four event symbols. (
Easy Instructions for the
OCC2 Timer Thermostat
☼
 
. )