Switching On The Appliance; Setting A Programme; Setting Additional Functions; Setting Timer Programming - Bosch SMV88UX36E User Manual

1

Switching on the appliance

Press ⁠ .
▶
The Eco 50° programme is set by
default.
The Eco 50° programme is an es-
pecially environmentally friendly
programme and ideal for normally
soiled tableware. It is the most effi-
cient programme for the combina-
tion of energy/water consumption
for this type of tableware and evid-
ences conformity with the EU Eco-
design Order.
If you do not perform any actions
on the appliance for 15 minutes,
the appliance will automatically
switch off.

Setting a programme

To adjust the wash cycle to the soil-
ing level of the tableware, select a
suitable programme.
Press the right programme button.
▶
→ "Programmes", Page 21
2

Setting additional functions

You can set additional functions to
complete the washing programme
selected.
Note: The additional functions which
can be used depend on the pro-
gramme selected.
→ "Programmes", Page 21
Press the button for the relevant
▶
additional function.
→ "Additional functions", Page 23
a The additional function is set and
the additional function button
flashes.

Setting timer programming

You can delay the start of the pro-
gramme by up to 24 hours.
Press ⁠ .
1.
Press or
2.
display shows the right time.
Depending on the setting of the
time display, the end of the pro-
gramme is shown on the display
either with "Finish in" (e.g.
3h 25min) or "Finish at" (e.g.
15:20 hours). You can change this
setting in the Basic settings
→ Page 41.
To activate timer programming,
3.
press ⁠ .
Tip: To deactivate timer program-
ming, press
3 seconds.

Starting the programme

Press .
▶
a The display shows the programme
information.
a The programme has ended when
the display shows "Finished".
Basic operation en
repeatedly until the
for approx.
39