en Before using for the first time
Before using for the first time
Before using for the
first time
Configure the settings for initial start-
up.
Performing initial start-up
On initial start-up or after a reset to
the factory settings, you will need to
make settings.
Requirement: The appliance has
been installed and connected.
→ Page 14
Add special salt. → Page 31
1.
Add rinse aid. → Page 33
2.
Switch on the appliance.
3.
a The display shows the settings for
initial start-up.
Press
repeatedly until the display
4.
shows the required setting.
Note: If you select Initial start-up
Home Connect here, make further
settings using the Home Connect
app on your mobile device.
– Language
– Initial start-up
Overview of water hardness settings
You can find an overview of the water hardness values that can be selected
here.
You can find out how hard your water is from your local water company or by
using a water hardness tester.
Water hardness °E
0 - 8
9 - 10
11 - 12
13 - 15
16 - 20
21 - 26
1
Depending on the appliance specifications
30
Hardness range
Soft
Soft
Medium
Medium
Medium
Hard
– Time format
– Time setting
– Water hardness
– Rinse aid disp.
– Water connection
You can change these settings
and other Basic settings
→ Page 41 on the appliance at
any time or using the Home Con-
nect app on your mobile device.
Press
or
5.
display shows the right value.
You can change several settings.
To save the settings, press
6.
approx. 3 seconds.
Water softening system
Water softening system
Hard water leaves limescale on the
tub and tableware and parts of the
appliance may become blocked.
To ensure good dishwashing results,
you can treat the water with special
salt and the water softening system.
To avoid damage to the appliance,
water with a hardness above 9 °E
must be softened.
mmol/l
0 - 1.1
1.2 - 1.4
1.5 - 1.8
1.9 - 2.1
2.2 - 2.9
3.0 - 3.7
1
repeatedly until the
Setting value
0 - 8
9 - 10
11 - 12
13 - 15
16 - 20
21 - 26
for
Need help?
Do you have a question about the SMV88UX36E and is the answer not in the manual?