Connecting to External Devices
Video Input
Connect the video cable as shown below and then connect the power cord
1
(see page 10).
Connecting with a BNC Cable
• Connect the input terminal with a proper color match.
BNC Cable
(not included)
Select an input signal.
2
Press INPUT on the remote control to select the input signal.
INPUT → ◄ ► → OK
Or, press INPUT on the bottom of the set.
INPUT → ◄ ► → AUTO/SET
Connecting with a BNC Cable
Select AV.
Input List
AV
Component
Set
Audio Cable
(not included)
VCR/DVD Receiver
RGB
HDMI/DVI
SuperSign
15