LG M3204C Owner's Manual page 31

Selecting Options
OPTION
▲
ISM Method : Normal
DPM Select : On
DPM Select : On
Power Indicator : ON
Logo Light : ON
Ineterface Select : RS232C
Network Setup
Information
Factory Reset
DPM Select
Turns power saving on/off.
Power Indicator
Sets the power indicator on the front side of the set to On or Off. If you set to Off, it will go Off. If you
set On at any time, the power indicator will automatically be turned on.
Logo Light
Resets the Logo Display Lamp on the front of the set to On or Off. If you set On, the lamp will
automatically turn on.
Ineterface Select
Sets up network connections.
- Network: LAN - Enables communication via Ethernet.
- RS-232C: Enables communication via Serial.
Network Setup
- DHCP: Allocates and sets up IP automatically.
- Manual: Sets up IP address, Gateway, Subnet Mask, Primary DNS and Secondary DNS.
The setup process is complete when you select Execute, and "IP Setup
Completed" is displayed at the bottom of the screen. While "Wait for IP Setup"
is displayed, you cannot use the local keys and remote control. "Wait for IP
Setup" is displayed for up to 40 seconds.
*If Network Select is set to Serial, DHCP and Manual are disabled.
Information
You can find information about your set serial number, F/W version, IP address and MAC
address here.
Factory Reset
Returns the set to the default factory settings.
User Menus
Move OK
ꔋ
31