Connecting to External Devices
Connecting to Your PC
Check that the computer, monitor and the peripherals are turned off. Then, connect the
1
signal input cable.
A.
Connecting with a D-Sub Signal Input Cable.
B.
Connecting with an HDMI-DVI Signal Input Cable (not included)
* When HDMI PC is used, a compatibility problem may occur.
A.
Rear back of the set.
B.
Rear back of the set.
* Use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite cores to
maintain standard compliance with your set.
2
Connect the Audio cable.
Rear back of the set.
3
Connect the power cord.
PC
MAC
Macintosh Adapter (not included)
Use the standard Macintosh adapter since an incompatible adapter
that uses a different signaling system is available on the market.
(not included)
10
PC/MAC
PC
PC
Rear back of the set.