Connecting to External Devices
Daisy Chaining Set
A.
Using RGB Input
To use different set connected to each other, connect one end of the signal input cable
(15-pin D-Sub signal cable) to the RGB OUT connector of set 1 and connect the other
end to the RGB IN connector of other set.
15-pin D-Sub Signal Cable
PC
PC
B.
Using AV Input
Audio Cable
(not included)
Video/TV
BNC Cable
(not included)
•
The number of set that can be connected to one output may vary depending on signal
Note
status and cable loss. If the signal status is good, and there is no cable loss, it is pos-
sible to connect up to 9 set. If you want to connect more than nine, a distributor is
recommended.
Set 1
Set 2
Set 1
13
Set 3
Set 2
Set 4
Set 3