Viewing Photos On The Color Display - Covert Scouting Cameras Red 40 Instruction Manual

If you have a new SD card, you should always
format the card before you use it in the camera. To
format the SD card, press the ▼ button until the
Format option is highlighted. Press the OK button.
You will see a screen that has Yes and No on it, use
the ► button to navigate to YES and press OK.
DEFAULT SET: The Default Set option is the last
option in the SYS tab. If you want to start clean and
re‐set all the settings to the original factory default
settings you will choose this option. Press the ▼
button to highlight the Default Set option. Press
OK. Make sure 100% that you want to re‐set all the
settings to factory default as you will have to start
over with the process in re‐doing all the settings.
Viewing photos on the color display:
You can view your photos on the color display when
in the field. If you want to do this, make sure the
Selector switch is set to SETUP. Press the Play
button. You can use the ►◄ buttons to toggle
through the photos. If you see photos you want to
delete, show the image on the screen and press the