Covert Scouting Cameras Red 40 Instruction Manual page 15

Press the ▲▼ button to set the MONTH, the press
the ► button to navigate to the DATE and use the
▼▲ buttons to set the date. Press the ► button
to navigate to the year and set that using the ▲▼
buttons.
Navigate down to the time using the ► button and
follow the same process as above to set the time.
Once you have the time set, press OK to save the
settings.
TIME STAMP: Press the ▼ button to highlight the
Time Stamp option. The default setting for the
Time Stamp option is ON. This puts the Time, Date,
Temp and moon phase at the bottom of the
camera. If you do not want the Time Stamp ON,
use the ► button to toggle to the OFF position.
Press OK to save the settings.
FLASH RANGE: You can set the Flash Range
depending on your set up. If most of the subjects
are going to be inside 20', use the 6m/20ft setting.
If you need extended night vision, choose the
12m/40' option. Press the ▼ button to highlight