Item
SNMP
TRAPS
Submit button
Reset button
7-106
Description
Trap IP
Specify the IP address of the SNMP trap receiver.
Address 2
An IPv4 or IPv6 address or a FQDN can be speci-
fied.
Range: Up to 255 characters
Default: 0.0.0.0
Trap UDP
Specify the port number of the SNMP trap.
Port
Range: 1 - 65535
Number 2
Default: 162
Saves and applies any changes made.
If you made changes to any of the parameter set-
tings but don't wish to apply the changes, selecting
this button restores the last submitted parameter
settings.
Configuring the Printer (Administrator Mode)