Konica Minolta Magicolor 1650EN Reference Manual page 129

5
In Administrator mode of PageScope Web Connection, select NetWare
from the Network tab, and then specify the following settings.
–
Enable NetWare: Checked
–
Ethernet Frame Type:
Select Auto. (Select the frame type according to the network envi-
ronment.)
–
Operating Mode: Select Remote Printer.
–
Print Server Name: Specify print server name created in step 4.
–
Printer Number:
Specify the printer number (0-255). When 255 is specified, the set-
ting is Auto.
6
Restart the printer (turn the printer off, then on again)
7
Use the NetWare server console to load PSERVER.NLM.
8
Use the NetWare server console to display the print server screen, and
then check that created printer is shown as Waiting for Job for the con-
nected printer (0).
3-6 Printing With NetWare