Setting The Address Manually - Konica Minolta Magicolor 1650EN Reference Manual

Setting the Address Manually

You may also manually change the printer's IP address, subnet mask, and
gateway by using the following instructions. (See chapter 5, "Understanding
the Ethernet Configuration Menu" for more information.)
When the IP address is changed, add a new port or reinstall the
printer driver.
CAUTION
You should always notify your network's administrator before changing
the printer's IP address.
1
Turn on your PC and printer.
2
After the printer's message window initialized, set the IP address.
Press Key
6-4
Until Display Reads
IDLE
MENU
MAIN MENU
MAIN MENU
PRINT MENU
MAIN MENU
INTERFACE MENU
INTERFACE MENU
ETHERNET
ETHERNET
TCP/IP
Network Connection