Changing The Scanning Mode; Changing The Picture Tone - JVC HX-D7C Instructions Manual

Changing the Scanning Mode

This System supports progressive scanning.
If you connect a progressive TV through the COMPONENT
jacks, you can enjoy a high quality picture from the built-in
DVD player by selecting "PROGRESSIV."
PROGRESSIV
INTERLACE
PROGRESSIV Progressive scanning. For a
progressive TV.
• PRGR. indicator lights on when
progressive scanning mode is
selected.
INTERLACE Interlaced scanning. For a
conventional TV.

Changing the Picture Tone

While showing a playback picture on the TV, you can select
the preset picture tone, or adjust it and store your own
preference.
To select a preset picture tone
1
Activate VFP.
NORMAL
On the TV screen
2
Select a preset picture tone.
NORMAL Normally select this.
CINEMA Suitable for a movie source.
USER1/USER2 You can adjust parameters and can
store the settings (see the next
column).
Remote
INFO
ONLY
Remote
INFO
ONLY
NORMAL
GAMMA 0
BRIGHTNESS 0
0
CONTRAST
0
SATURATION
0
GAMMA
BRIGHTNESS 0
TINT 0
0
CONTRAST
SATURATION 0
SHARPNESS 0
0
TINT
SHARPNESS 0
To adjust the picture tone
1
Select "USER1" or "USER2."
• Follow steps 1 and 2 explained above.
2
Select a parameter you want to adjust.
GAMMA Adjust if the neutral color is bright or
dark. The brightness of dark and
bright portions is maintained
(–3 to +3).
BRIGHTNESS Adjust if the picture is bright or dark
as a whole (–8 to +8).
CONTRAST Adjust if the far and near position is
unnatural (–7 to +7).
SATURATION Adjust if the picture is whitish or
blackish (–7 to +7).
TINT Adjust if the human skin color is
unnatural (–7 to +7).
SHARPNESS Adjust if the picture is indistinct
(–8 to +8).
3
Adjust the parameter.
4
Repeat steps 2 to 3 to adjust other parameters.
5
Finish setting.
18