JVC HX-D7C Instructions Manual page 81

4 Select the repeat mode you want.
ALL Repeats all discs.
A-B Repeats a desired portion (see
page 28).
TITLE Repeats the current title.
GROUP Repeats the current group.
DISC Repeats the disc.
CHAPTER Repeats the current chapter.
TRACK* Repeats the current track.
OFF Cancels Repeat Play.
* During Program Play or Random Play, "STEP"
appears.
• Repeat modes depend on the current playback disc.
Refer to page 25.
5 Finish the setting.
Pop-up window goes off.
To cancel Repeat Play, select "OFF" in step 4.
To erase the on-screen bar
A-B Repeat
1 While playing, display the on-screen bar with the pull-
down menu.
2 Select .
3 Display the pop-up windows.
DISC 1
8.5 Mbps
DVD-VIDEO
TIME OFF CHAP.
OFF
4 Select "A-B."
8.5 Mbps DISC 1 TITLE
DVD-VIDEO
TIME TIME OFF OFF CHAP.
A–B
5 Select the start point (A).
DVD-VIDEO
TIME TIME
TITLE 2 CHAP 3 TOTAL 1:01:58
1/3 1/3 1/1
14 CHAP 3 23 TOTAL TOTAL 1:01:58 1:25:58
TITLE 2 CHAP
1/3 1/3 1/3
1/3 1/ 3 1/1
14
8.5 Mbps DISC 1 TITLE TITLE 2 CH C
1/3
OFF A- CHAP. 1/3
6 Select the end point (B).
A-B Repeat starts. The selected
portion plays repeatedly.
• Before pressing ENTER, you can
search for the end point using ¡.
Time Search
You can move to a particular point by specifying the elapsed
playing time from the beginning.
1 While playing (without PBC for SVCD/VCD), display
the on-screen bar with the pull-down menu.
• Except for DVD: Time Search can be used before
starting playback.
2 Select .
3 Display the pop-up window.
DISC 1
8.5 Mbps TITLE
DVD-VIDEO
TIME TIME OFF OFF CHAP.
TIME _ : _ _ : _ _
4 Enter the time.
You can specify the time in hours/minutes/seconds.
• It is always required to enter the hour digit (even "0"
hour), but it is not required to enter trailing zeros (the
last two digits in the examples above).
• To correct a misentry, press cursor 2 to erase the last
entry.
5 Finish the setting.
The System starts playing from
the specified time.
To erase the on-screen bar
TITLE 2 14 CHAP CHAP 3 23 TOTAL TOTAL 1:01:58 1:25:58
1/3 1/3 1/3
1/3 1/ 3 1/1
Examples:
To move to a point of 1
(hours): 02 (minutes): 00
(seconds), press 1, 0, 2, 0,
then 0.
To move to a point of 54
(minutes): 00 (seconds),
press 0, 5, 4, 0, then 0.
28