Selecting The Zone 2 Source To Play; Adjusting The Zone 2 Volume - JVC RX-DP15BC Instructions Manual

Selecting the Zone 2 Source to Play

Press one of the source selecting buttons.
DVD DVD MULTI VCR 1 VCR 2 TV/DBS VIDEO
On the unit
Selected source name
DVD DVD MULTI
VCR 1 VCR 2
TV/DBS VIDEO
From the remote control
DVD : Selects the DVD player.
VCR 1 : Selects the video component connected to the
VCR 1 IN jacks.
VCR 2 : Selects the video component connected to the
VCR 2 IN jacks.
TV/DBS : Selects the DBS tuner.
• Does not work for selecting TV.
VIDEO : Selects the video component connected to the
VIDEO jacks.
CD* : Selects the CD player.
PHONO* : Selects the turntable.
TAPE/MD* : Selects the cassette deck (or the MD recorder).
CDR* : Selects the CD recorder.
FM/AM* : Selects the tuner.
Each time you press the button, the band alternates
between FM and AM.
Notes:
• When you press one of the audio source selecting buttons on the
remote control marked with an asterisk ( * ), the receiver
automatically turns on. If you turn on the receiver with ZONE 1/
ZONE 2 (LEARN/TRANSMIT) selector set to "ZONE 1," press
ZONE 2 ON/OFF to activate Zone 2 operations.
– If you press one of the audio source selecting buttons on the
remote control with the ZONE 1/ZONE 2 (LEARN/TRANSMIT)
selector set to "ZONE 2" while the receiver is turned on but Zone
2 is turned off, Zone 2 is turned on with the audio source
selected.
• You cannot select the following as a Zone 2 source:
– "TV," "DVD MULTI," and "EXT 7.1CH"
– Any digital input
You can only select the analog input as the Zone 2 source. (If
analog connections have not been made, no sound comes out of
the Zone 2 speakers.)
31
CD PHONO TAPE/MD CDR FM/AM EXT 7.1CH
SPEAKERS 1 ZONE 2
VOLUME
dB dB
The Zone 2 volume
level appears.
PHONO CD
TAPE/MD CDR
EXT 7.1CH
FM/AM
Selecting different sources for picture and
sound
While watching pictures from a video source (DVD player, VCR, or
DBS tuner), you can listen to sound of an audio source.
• Once you have selected a video source, pictures of the selected
source are sent to the TV until you select another video source.
Press one of the audio source selecting buttons—
PHONO, CD, TAPE/MD, CDR, FM/AM—while
viewing the picture from a video component such as
the VCR or DVD player, etc.
DVD DVD MULTI VCR 1 VCR 2 TV/DBS VIDEO
On the unit
DVD DVD MULTI
VCR 1 VCR 2
TV/DBS VIDEO
From the remote control

Adjusting the Zone 2 Volume

On the unit:
To increase the volume, turn MASTER
VOLUME clockwise.
To decrease the volume, turn it
counterclockwise.
• When you turn MASTER VOLUME
rapidly, the volume level also changes
rapidly.
• When you turn MASTER VOLUME slowly,
the volume level also changes slowly.
From the remote control:
To increase the volume, press VOLUME +.
To decrease the volume, press VOLUME –.
CAUTIONS:
• Always set the volume to the minimum before starting any source. If
the volume is set at a high level, the sudden blast of sound energy
can permanently damage your hearing and/or ruin your speakers.
• Be careful not to turn up the volume too high when controlling the
receiver without listening to the playback sound. For example, when
adjusting the volume level in Zone 2 from Zone 1.
Notes:
• The volume level can be adjusted within the range of "– – – dB"
(minimum) "–71.0 dB" to "+18.0 dB" (maximum).
• With "ZONE2PREOUT" set to "VARIABLE" (see page 43), no
sounds come out of the ZONE 2 PREOUT jacks if the volume level
is set to "– – – dB." In this case, increasing the volume level will
enable the sound output through the ZONE 2 PREOUT jacks.
CD PHONO TAPE/MD CDR FM/AM EXT 7.1CH
PHONO CD
CDR
TAPE/MD
FM/AM EXT 7.1CH
MASTER VOLUME
Down Up
VOLUME