JVC FS-Y1A Instructions Manual page 100

Connecting up
Connecting other devices
This page is for when connecting the main unit with
other devices.
Connecting subwoofer
With an amplifier-built in subwoofer (not supplied), you can enjoy a more dynamic bass sound.
Refer to the manual of the subwoofer for details.
Amplifier-built-in subwoofer
(not supplied)
Connecting with other audio device
Output
Red
AUX
Input
R
10
(continued)
– Do not turn on the power until the connection is complete –
Other audio
device
Audio cord (not
supplied)
White
Main unit
L
Audio cord (not supplied)
(If an audio cord comes with the amplifier-built-in subwoofer,
you can use the cord.)
When you want to hear sound from the subwoofer,
press S.WFR OUT on the remote control to display
"SUBWOOFER" on the display window on the
main unit. Each time you press the button, the
display toggles between "SUBWOOFER" and
"OFF".
NOTE
When "SUBWOOFER" is selected, bass sound from
the left and right speakers will be automatically
lowered and the bass sound will be emitted mainly
from the subwoofer.
Connecting with a digital device
Input
Output
Main unit
CAUTION
• For details of signals to be output, refer to page
30.
• If connecting the main unit with equipment with the
function of a Dolby Digital decoder, the setting in
"D. RANGE COMPRESSION" of "AUDIO" (page 30)
will be invalid regarding sound from the digital
audio output of the main unit.
Connection
Main unit
SUB-
WOOFER
OUT
Digital device
(MD recorder etc.)
To digital input terminal
Optical digital cord
(not supplied)
PCM/
STREAM
DVD OPTICAL
DIGITAL OUT