Tuning In To A Preset Station - JVC FS-Y1A Instructions Manual

Tuning in to a preset station

Presetting stations in the system allows you to
easily tune in to a station.
NOTE
Set the remote control mode selector to
AUDIO before using the number buttons.
Presetting stations
The system stores up to 30 FM stations and up to
15 AM stations.
1
Select a station you want to
store (page 32 for how to
select).
2
Press MEMORY.
"MEMORY" is flashing on the display window
for a while.
3
Select the number you want to
store by pressing number
buttons while "MEMORY" is
flashing.
• You can also select the number by using the
number buttons.
• Refer to "How to use the number buttons"
(page 15).
4
Press MEMORY while the
selected number is flashing.
"STORED" appears on the display window
and the selected station is stored.
NOTE
• Storing a new station to a used number erases the
previously stored station.
• After storing new stations, do not unplug the AC
power cord to turn off the system. If you do so, the
new preset stations will be cleared.
Tuning in to a preset
station
1
Press FM or AM to select either
FM or AM.
2
Press the number buttons to
select the memory number of a
station you want to tune in to.
Refer to "How to use the number buttons"
(page 15).
You can also select by pressing
Listening to radio
1 ¡
/ .
33