Fm/Am Tuner Operations; Manual Tuning; Preset Tuning; Selecting The Fm Reception Mode - JVC TH-D5 Instructions Manual

FM/AM tuner operations

Set the remote control mode
before operation.
• Select the desired source ("FM"
*

Manual tuning

Tuning in to a station
You can also tune in to a station automatically. Press
and hold TUNING 9/TUNING ( until the station
search starts. The system tunes in the first station of
sufficient signal strength found automatically.
You can also tune in to the station by pressing cursor
5/Y.
27
or "AM") you want to listen to.
( 11)
TH-D50/TH-D5/TH-D4: The FM/
AM button is used instead of FM/
AM/XM.

Preset tuning

You can preset 30 FM stations and 15 AM stations.
*
Storing the preset stations
1
Tune in to the station you want to preset.
2
"_ _" flashes on the display. Perform the next
step while "_ _" is flashing.
3
Select a preset number, then store the station to
that number.
Enter a preset number
• "STORED" appears on the display.
Tuning in to a preset station
Select a preset number.
You can also select a preset number
by pressing PRESET(/CAT) UP or PRESET(/CAT)
DOWN.
*
For details on using the number buttons, see "How to use the
number buttons" (

Selecting the FM reception mode

When the stereo FM program currently tuned in is noisy, you
can change the FM reception mode to improve the reception.
AUTO Normally select this.
MONO
Store
*
*
10).
Select to improve reception. (You
will lose the stereo effect.)