Scanning Mode Setting - JVC TH-D5 Instructions Manual

Setting the audio input for
external components
Set the audio input of the external component for "VIDEO1/
VIDEO2" (TH-D60) or "VIDEO" (TH-D50/TH-D5/TH-
D4).
1
2
TH-D60 only: Select a source you want to set the
audio input for.
AIN.1
AIN.2
3
Select an appropriate audio input according to
the audio connection. (
2CH
5.1CH
COAX
OPT
You can select the following settings for each source
(underlined items are the initial settings for each
source):
2
– "VIDEO1": 5.1CH* , COAX*
– "VIDEO2": 2CH, COAX*
– "VIDEO": 2CH and OPT
If your System is the TH-D60, make the audio input
setting for both "VIDEO1" and "VIDEO2."
1
*
"AIN.1" or "AIN.2" appears on TH-D60, and "AIN." on
TH-D50/TH-D5/TH-D4.
2
*
TH-D60 only: When the speaker position mode is set to
"S.SPK F," "5.1CH" is not selectable.
3
*
TH-D60 only: It is not possible to select the same audio
input setting for "VIDEO 1" and "VIDEO 2." For example,
when "COAX" is assigned to "VIDEO 1," it is not
selectable for "VIDEO 2."
1
*
Item
Current setting
For "VIDEO 1"
For "VIDEO 2"
8, 9)
For connection via the
AUDIO IN jacks
For connection via the
AUDIO MULTI IN jacks
For connection via the
COAXIAL jack
For connection via the
OPTICAL terminal
3 3
, and OPT*
3 3
, and OPT*

Scanning mode setting

Select the scanning mode according to the type
of TV and connection method.
To use the progressive mode, connect the TV to the
HDMI MONITOR OUT terminal or COMPONENT
1
jacks* . ( 7)
1
Select "DVD" or "USB" as the source.
( 11)
2
Hold
«
3
Select an appropriate scanning mode, then
confirm the selection.
Select
2
480I*
To see the picture in interlaced mode.
3
1080I*
480P
To see the picture in progressive
mode.
3
720P*
The System automatically emits the
3
video signal to get the best picture
AUTO*
quality on your TV.
You can get better picture quality in the following
orders:
– 1080I > 720P
– 480P > 480I
When the picture is not shown correctly, change
the scanning mode to the interlaced mode.
When the TV is connected through S-VIDEO or
VIDEO jack, the scanning mode setting has no
effect.
1
*
Activate progressive mode only when your TV supports
progressive video signals.
2
*
Selectable only when the TV is connected via COMPONENT
jacks. ( 8)
3
*
Selectable only when the TV is connected via HDMI
MONITOR OUT terminal. (
See page 12 for button
locations.
Confirm
7)
14