Understanding the basics
Turning your TV on or off
To turn your TV on and off:
Make sure that the power cord is already connected to a
1
power outlet.
2
Press
(power) to turn on your TV. The power indicator LED
turns blue.
Press
(power) again to turn off your TV. Your TV enters
3
Standby mode and the power indicator turns red or purple,
depending on the TV power on mode you select. For more
information, see "Setting the TV power on mode" on
page 93.
Warning
When your TV is off, power still flows into it. To
disconnect power, unplug the power cord.
Note
If your TV does not detect a signal and you do not
press any buttons for several minutes, your TV goes
into Standby mode automatically.
Selecting the video input source
Note
If the source sensor is turned on, the inputs that do
not have devices connected are grayed in the input
source list. When you press INPUT, your TV moves
between the inputs that have devices connected.
You can select a grayed input by pressing
more information, see "Turning the source sensor on
or off" on page 95.
To select the video input source:
Turn on your TV, then press INPUT on the remote control.
1
The input source list opens.
Press
or
2
SELECT. You can select:
• TV
• HDMI 1
• HDMI 2
• HDMI 3
• HDMI 4
• Component/Composite (to select a component or
composite device)
• VGA
www.insigniaproducts.com
NS-32E859A11/NS-42E859A11
Getting Started
or . For
TV
HDMI 1
HDMI 2
HDMI 3
HDMI 4
Component/Composite
VGA
to highlight a video input source, then press
35