Connecting An Hdmi Device - Insignia NS-42E859A11 User Manual

Getting Started

Connecting an HDMI device

20
NS-32E859A11/NS-42E859A11
If you use the COMPONENT/AV-IN (Y/P
3
connect an audio cable (provided) to the L and R (audio in)
jacks on the back of your TV.
Connect the other end of the audio cable to the audio out
4
jack(s) on the cable or satellite box.
Note
• If the cable or satellite box does not have an
HDMI or component connection, you can
connect the cable or satellite to the composite
jacks on the back of your TV. See "Connecting a
composite video device" on page 23.
• If the cable or satellite box does not have an
HDMI, component, or composite connection,
connect the box to the ANT/CABLE IN jack on
the back of your TV. See "Connecting an
antenna or cable TV without a cable box" on
page 18.
If your device has an HDMI connection, we recommend that
you use the HDMI connection to get the best quality possible.
To connect an HDMI device:
Make sure that your TV's power cord is unplugged and the
1
HDMI device is turned off.
/P ) jacks, Connect an HDMI cable (not provided) to the HDMI 1,
2
B R
HDMI 2, HDMI 3, or HDMI/DVI jack on the side of your TV
and to the HDMI OUT jack on the HDMI device.
To play from an HDMI device:
Turn on your TV.
1
Turn on the HDMI device, then set it to the correct output
2
mode. See the documentation that came with the device
for more information.
Press INPUT to open the input source list.
3
Press
4
HDMI 4, then press SELECT.
www.insigniaproducts.com
Side of TV
HDMI device
or to highlight HDMI 1, HDMI 2, HDMI 3, or
Note
If the source sensor is turned on, the inputs that do
not have devices connected are grayed in the input
source list. When you press INPUT, your TV moves
between the inputs that have devices connected.
You can select a grayed input by pressing
more information, see "Turning the source sensor on
or off" on page 95.
or . For