Wired Connection; Turning On Your Tv For The First Time - Insignia NS-42E859A11 User Manual

Wired connection

Depending on how your Internet connection is setup, you can
connect your TV to:
• An Internet jack
• A modem
• A router
To connect your TV to your home network:
• Connect an Ethernet cable (not provided) to the ETHERNET
jack on the back of your TV and to your home network.
Back of TV
COMPONENT AV IN
ANT CABLE IN ETHERNET
Y Video
OR
Internet jack Modem
For step-by-step instructions to set up a wired Internet
connection, see "Configuring a wired connection" on page 86.
Turning on your TV for the
first time
Note
Unless otherwise noted, all tasks in this section are
based on using the remote control.
The first time you turn on your TV, the Setup Wizard opens. The
Setup Wizard guides you through setting up basic settings. You
can skip these settings or press EXIT, MENU, TiVo, or LIVE on
your remote control to exit the wizard (except when a software
update is in progress).
SPDIF
L R
Router
www.insigniaproducts.com
NS-32E859A11/NS-42E859A11
To set up your TV:
Make sure that you have:
1
• Installed the remote control batteries. (See page 17 for
details).
• Connected an antenna, cable TV, or satellite TV. (See
page 18 for details.)
• Connected to your home network, if available. (See
page 26 for details).
• Connected the power cord. (See page 17 for details.)
2 Press (power) to turn on your TV.
The Welcome screen opens. Press
3
this TV (typical), then press SELECT.
Welcome
You are about to begin Guided Setup,which prepares the Insignia HD
TV for your use. This typically takes less than 45 minutes.
(If you skip Guided Setup now, you can set it up later by pressing TIVO
and choosing Settings > Help > Reset this TV > Repeat Guided
Setup.)
Set up this TV(typical)
Set up in retail mode
Skip for now
Note
If you are setting up your TV for in-store display,
highlight Set up in retail mode, then press SELECT.
The Retail Mode Energy Usage screen opens. Highlight
Continue with retail mode, then press SELECT. The
Retail Mode Activated screen opens. Press SELECT to
select Continue.
Getting Started
or to highlight Set up
27