Connecting A Component Video Device - Insignia NS-42E859A11 User Manual

Getting Started

Connecting a component video device

22
NS-32E859A11/NS-42E859A11
To connect a component video device:
Make sure that your TV's power cord is unplugged and the
1
component video device is turned off.
Connect a component video cable (provided) to the
2
COMPONENT/AV-IN (Y/P /P ) jacks on the back of your TV
B R
and to the COMPONENT OUT jacks on the component
video device.
Component video device
COMPONENT/ AV-IN
ETHERNET SPDIF SPDIF
Y/Video L R
Back of TV
Audio cable
Component video cable
Connect an audio cable (provided) to the L and R (audio in)
3
jacks on the back of your TV and to the L and R AUDIO OUT
jacks on the component video device.
To play from the component video device:
Turn on your TV.
1
Turn on the component video device, then set it to the
2
correct output mode. See the documentation that came
with the device for more information.
3 Press INPUT to open the input source list.
4 Press or
press SELECT.
Note
If the source sensor is turned on, the inputs that do
not have devices connected are grayed in the input
source list. When you press INPUT, your TV moves
Cables are often
between the inputs that have devices connected.
color-coded. Match color
You can select a grayed input by pressing
to color.
more information, see "Turning the source sensor on
or off" on page 95.
www.insigniaproducts.com
to highlight Component/Composite, then
or . For