Insignia NS-42E859A11 User Manual page 9

Note to CATV system installer
Article 820 of the National Electrical Code, ANSI/NFPA No. 40
provides guidance for correct grounding. Specifically, it states
that the cable ground must be connected to the grounding
system of the building as close to the point of cable entry as
practical.
Condensation
Moisture will form on the TV if the TV is brought from cool
surroundings into a warm room or if the temperature of the
room rises suddenly. When this happens, the TV's performance
may be impaired. To prevent this, let the TV stand in its new
surroundings for about an hour before switching it on, or make
sure that the room temperature rises gradually.
Condensation may also form during the summer if the TV is
exposed to the breeze from an air conditioner. In such cases,
change the location of the TV.
Mobile telephone warning
To avoid interference with your TV picture and sound,
operating problems, or even damage, keep your cordless and
cellular telephones away from the TV.
NS-32E859A11/NS-42E859A11
End of life directives
Your TV contains tin-lead solder. Disposal of this material may
be regulated for environmental reasons. Your TV also contains
material that can be recycled and reused. For disposal or
recycling information, contact your local authorities or the
Electronic Industries Alliance at www.eia.org to find a recycler
in your area.
Non-active pixels
The LCD panel contains almost 3 million thin film transistors,
which provide exceptionally sharp video quality. Occasionally, a
few non-active pixels may appear on the screen as a fixed blue,
green, or red point. These non-active pixels do not adversely
affect the performance of your TV, and are not considered
defects.
www.insigniaproducts.com
Safety Information
5