Available Fonts And Barcodes - Datamax PE Operator's Manual

Available Fonts and Barcodes

All character fonts and bar codes available with the Printer are
described in this section. Each font and barcode have a name
associated with it for use in programming. Human-readable fonts
have numeric names while bar code fonts have alpha names.
Uppercase alpha names will print bar codes with human-readable
interpretations, while lowercase alpha names will print bar codes
only.
Fonts 0 through 8 use the slash zero (Ø) conventions for
distinguishing between the zero and the letter O. The slash can be
removed with the label formatting command Z. These fonts are
non-proportional (monospaced) fonts, all of the characters take up
the same amount of space when printed. This is helpful when using
variable data in a fixed area. The sizes of these fonts are shown in
Table B-1.
The Triumvirate font number 9 is a proportional font, each character
will take up a different amount of space when printed. For example,
the letter W will be larger than the letter I.
Listed below are a few of the 29 scaleable font symbol sets that are
accessible:
(US) ISO 6: ASCII Symbol Set, font code S00
(DN) ISO 60 Danish/Norwegian Symbol Set, font code S00
(IT) ISO 15: Italian Symbol Set, font code S00
(GR) ISO 21: German Symbol Set, font code S00
(FR) ISO 69: French Symbol Set, font code S00
(E5) ISO 8859/5 Latin 5 Set, font code S00
(E2) ISO 8859/2 Latin 2 Set, font code S00
(DT) DeskTop Symbol Set, font code S00
For a complete list of the scaleable font symbol sets refer to the
Programmer's Manual.
PE Series Operator's Manual
Appendix B
B-1