Box contents Technical data Before you install How to install Ada compliance Operation + maintenance Warranty Contact 2 + TSL.PS1 ANGLED PIPE SKIRT MANUAL...
TSL.RSS.24.CS / WH / BK Bracket PS1.B (white) / PS1.BK (black) General information info.uk@thesplashlab.com +44 (0) 161 482 7000 Meadow Industrial Estate, 34 Water Street Stockport SK1 2BU Technical support technical@thesplashlab.com For further contact information visit: www.thesplashlab.com 4 + TSL.PS1 ANGLED PIPE SKIRT MANUAL...
Basin The Splash Lab Monolith (Type A or B) basin is recommended for use with the PS1 angled pipe skirt. If an alternative basin is used, please con- firm with The Splash Lab that the products will be compliant.
If side skirts have been specified, fit the panels Fit the unattached hinge panel at the bottom of over the bracket from the outside. the door over the brackets so that the holes in each line up. 6 + TSL.PS1 ANGLED PIPE SKIRT MANUAL...
Page 7
Using an appropriately sized bolt and nut, fix the Fold the door up until the magnetic closure side skirt, bracket and hinge panel together by engages. passing the bolt up through bracket hole and securing with the nut. 7 + TSL.PS1 ANGLED PIPE SKIRT MANUAL...
TSL.PS1 Angled Pipe Skirt Manual 1 year limited warranty If a defect is found in normal use, The Splash Lab will, at their discretion, repair, provide a replace- ment part or product, or make appropriate adjustments. Damage caused by accident, misuse, or abuse is not covered by this warranty.
General information info.uk@thesplashlab.com +44 (0)161 482 7000 Unit 34, Meadow Industrial Estate, Water Street Stockport SK1 2BU United Kingdom Technical support info.uk@thesplashlab.com For further information visit: www.thesplashlab.com/uk 11 + TSL.PS1 ANGLED PIPE SKIRT MANUAL...
Need help?
Do you have a question about the TSL.PS1 and is the answer not in the manual?
Questions and answers