Related Manuals for The Splash Lab L-219 Series
Summary of Contents for The Splash Lab L-219 Series
- Page 1 L-219 Series Deck Mounted Sensor Soap Dispenser Installation & Maintenance Guide L-219CS L-219CS001 Satin Stainless lovair.com Steel...
-
Page 2: Table Of Contents
L-219 Soap Dispenser Read and save these instructions Contents Safety and Warnings Technical Data WARNING - TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS, Box Contents OBSERVE THE FOLLOWING: Before You Install How to Install • Use this unit only in the manner intended by the manufacturer. -
Page 3: Technical Data
Technical Data Box Contents Mains power supply L-219 head 110 - 240 VAC (Auto Soap Foamer) Base Plate Fuse Anti-Rotation Plate 3A fused spur to be connected to power supply transformer. Fixing Nut Pre-set sensor range 120mm (4 3/4") Minimum sensor range 50mm (2”) Maximum sensor range 250mm (9 13/16") -
Page 4: Before You Install
Before You Install How to Install Power Recommended Soap The L-219 Soap head is compatible with the Lovair strongly suggest use of specific Auto Soap Foamer system, please see the foaming soap. Failure to do so may Auto Soap Foamer Manual or contact Lovair result in reduced functionality and poor for details on power input options. - Page 5 How to Install (continued) 3. This soap dispenser can be fitted to a variety of sink types: Lovair Approved Sink Alternative Corian Sink Other Sinks 4. Attach the fixing nut (D) to the 5. Connect the sensor cable from the mounting tube of the tap under the deck.
-
Page 6: The Complete System
How to Install (continued) The Complete System OUTPUT PLUMBING 6. Connect the tube from the head to the 7. Power on the Auto Soap Foamer and output plumbing on the Auto Soap follow the instructions in the Auto Soap Foamer unit*. Foamer Manual regarding priming. -
Page 7: Resetting The Sensor Distance
Resetting the Sensor Distance Remove reflective clothing during installation 2. Look at the sensor under the base of the 3. When the light stops flashing move your 4. When the light goes out the new detection Firstly disconnect the sensor cable from the Auto Soap Foamer unit. -
Page 8: Replacing The Sensor
Replacing the Sensor Remove reflective clothing during installation 2. Remove the base plate (B) and the 3. Remove the dispenser extension piece 4. Replace the sensor and reassemble the Firstly turn off the mains power supply and disconnect the sensor cable from the secondary plate located inside the base using a 7mm spanner to turn anti- head making sure to reconnect the sensor... -
Page 9: Cleaning
Cleaning & Maintenance Warranty Information 1.1 The Supplier warrants that on delivery, and for limitation the installation guide for the Goods a period of 24 months from the date of delivery provided by the Supplier, or (if there are none) good (Warranty Period), the Goods shall: trade practice regarding the same;... -
Page 10: Warranty
Troubleshooting We are always looking to improve. If these did not solve your problem please contact us and we will endeavour to help. Tel: +44 (0)161 482 7000 Email: technical@lovair.com Symptom Issue Solution Sensor does not seem to activate pump There is no power. -
Page 11: Spare Parts
Notes: Spare Parts & Accessories _______________________________________________________ SPARE PARTS _______________________________________________________ L150028 Sensor Pre-set 120mm (4 3/4") _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ © Lovair L-219 Soap Dispenser Manual... - Page 12 Contact GENERAL INFORMATION TECHNICAL SUPPOR T FOR FUR THER CONTACT INFORMATION VISIT: www.lovair.com/en/contact info.uk@lovair.com technical@lovair.com +44 (0) 161 482 7000 DOC NO: L219 - 00 - 02...
Need help?
Do you have a question about the L-219 Series and is the answer not in the manual?
Questions and answers