Set Up Menu; Audio Language - Harman Kardon DVD 10 User Manual

Playing DVD Discs

Set Up Menu

During STOP mode, if you press MENU on the remote, current Set Up
Menu Display appears on the screen.

Audio Language

Select Audio Language
This step will define the default audio language (if disc was created with
different language tracks). Choosing an audio language from the Banner
Display (see page 9) will overwrite this setting only temporarily.
1. Press ARROW (UP or DOWN) on the remote to select Audio on the
SET UP MENU DISPLAY.
2. Press ENTER or ARROW (right) , AUDIO MENU appears.
2. Press ENTER or ARROW (right), Audio Menu appears.
3. Press ARROW (UP or DOWN) on the remote to select specific Audio
Language.
4. Press ENTER.
5. Press PLAY to resume normal playback or RETURN to delete Set Up
Menu display.
• You can exit the Audio menu at any time by pressing the
ARROW (left).
20
Select Other Language
1. Select Other and Press ENTER.
2. Input first number of language code (see table on page 32) into the
first digit by pressing ARROW (UP or DOWN) on the remote, then
ENTER or ARROW (right) and enter the other 3 digits the same way.
The code can also be entered directly with the NUMBER (0~9) keys.
3. When cursor is on OK icon press ENTER.
4. Press PLAY to resume normal playback or RETURN to delete Set Up
Menu display.
• If language selected is not available on disc, the language designated
as default by each disc will be selected.