System Setup; System Defaults; Set Up Menu - Harman Kardon DVD 37 Owner's Manual

29681_DVD37_ENG 18/08/06

System Setup

System Defaults

The final step of the installation is to establish
the system's defaults. It is helpful to take a few
minutes to familiarize yourself with these
settings, as they may require change before the
first use and later from time to time.
General Functionality of the OSD Menu
The complete setup and control of the DVD 37
takes place in an advanced user-guided On
Screen Display (OSD) menu system. The OSD can
be activated by pressing the SETUP button on the
remote control. Pressing this button again
deactivates the OSD.
The main menu consists of a PLAYER
INFORMATION Menu and a SET-UP Menu. The
PLAYER INFORMATION Menu will show all
information and options available for the disc
currently playing. The SET-UP Menu will help you
configure all audio and video settings which are
normally only made once.
Each Main Menu contains Submenus. These sub-
menus are shown as icons on the left side of the
menu. They can be highlighted by a white square
around the icon by moving the cursor with the
ARROW buttons. Icons can be activated by
pressing ENTER as soon as an icon is high-
lighted. When ENTER has been pressed, the color
of the icon will change to dark blue and you will
see that the Actual Settings of this submenu will
appear on the right side of the menu.
Although each Menu has various Submenus and
Settings, navigating through menus, submenus
and settings goes the same way. All submenus,
settings and options can be accessed with the
help of the ARROW (
KL N M
buttons on the remote control.
To change a setting, simply move the cursor to
the setting you wish to change. This setting will
be highlighted in light blue, and a brief explana-
tion will appear in the Instruction Line on the
bottom of your screen.
Next, press the Enter Button 6 and a
dropdown menu will appear that contains the
available options for that setting. Press the
Navigation Buttons 9 until the
KL
desired option is highlighted, then press the
Enter Button 6 to select that option.
16 SYSTEM SETUP
12:17 Side 16
A Main Menu Line
B Submenus
C Actual Settings
D Instruction Line
Most DVDs are created to allow setup menus to
be displayed while the disc is playing, super-
imposed over the video playback. However, some
discs are authored in a way that does not allow
this. If you see the
screen after pressing the Setup Button 8 or
the Info Button A, press the Stop Button
I and then press the Setup or Info Button
8A again.
) and ENTER

Set Up Menu

The first step in checking or changing the system
defaults is to access the Setup Menu. First, make
certain that the DVD is properly connected to a
video display, and that power is connected. For
this process, however, you do not need to load
any discs into the unit.
During STOP, PAUSE or PLAY mode, if you press
SETUP on the remote, the Set Up Menu appears on
the screen.
This Main Menu and all menus in the following
section may look different, listing the settings
with different languages, depending on the set-
tings made previously. With the factory default
setting all languages are set to "English", that´s
why with all menus the English version is shown
in the manual.
In the SET-UP Menu you will find submenus for
making or changing all settings and adjustments
for both Audio and Video handling of your
DVD 37.
icon displayed on the