Advantech ICR-1601 Start Manual page 5

Disconnect the router from the power supply before handling the SIM card!
3. Power
The router requires an external DC power supply. The DC voltage required is between
1
5 and 24 VDC. Please connect the power adapter DC 5 V/2 A to the PWR connector on the
panel of the router; see the figure below.
1
Devices manufactured before 2024 support a maximum input voltage of 18 VDC. If you're unsure of your
device's production date, please consult your Advantech sales representative to confirm which hardware version
you have.
QSG-0005-EN, November 14, 2024
Start Guide
4 Released in the Czech Republic