Bell System Practices 755A Reference

BEU SYSTEM PRACTICES
AT&TCo Standard
755A AND 755AM
1. GENERAL
1.01 This section contains information for the
755A (MD) and 755AM manual, panel-type
telephone set.
1.02
This section is reissued to
Add 755AM (modular) telephone set
Show 755A telephone set MD
Add new terminal board TB3
2. IDENTIFICATION
Purpose
2.o1
The 755A and 755AMtelephone set is intended
for use where customer requests a flush
mounted, manual telephone installation or where
resistance to vandalism is desired. A ringer is not
part of the factory supplied set. Should a ringer
be required, provisions have been made to permit
field installation of a C4A or C4B ringer.
Ordering Guide
Set, Telephone, 755AM-52
Note:
-52 indicates gray handset.
Door
panel and frame are brushed stainless steel.
(a) Associated Equipment (order
separately):
118B Apparatus Box
(b) Replaceable Components:
Assembly, Lock, KS-19277
812365435, (P-23F543) Stud Fastener
SECTION 502-750-105
Issue 3, August 1978
TELEPHONE SETS
Fig. 1—755AM Telephone Set
812366508 (P-23 F650) Door and Frame
Assembly
60A4 Coin Dial Unit
842613390 Network and Chassis Assembly
802695635 (P-269563) Instruction Card
NOTICE
Not for use or disclosure outside jhe
Bell System except under written agreement
Printed in U.S.A.
Page 1