BELL SYSTEM PRACTICES
Plant Series
Fig. 1 - 17028 Telephone Set
1.
GENERAL
This section provides identification, installation,
1 .01
maintenance, and connection information for
the 1702B telephone set previously contained in
Sections 502-710-102 and 502-710-433 which are
hereby canceled.
2.
IDENTIFICATION
This set is equipped with a concealed lamp
2.01
which illuminates the dial when the handset
is removed. This lamp also serves as a night light
under control of a slide switch located in the base
at the rear of set (Fig. 2).
These sets are available in standard telephone
2.02
colors.
promoted and nonpromoted colors.
The 1702B telephone set is factory wired
2.03
for individual line or 2-party flat rate service.
With internal wiring changes this set may be used
with other services (Table A).
BSP 502-702-100-101_19 70-03-0l.jpg
Scanned by Frank Harrell, {Cowboy Frank) Castle Rock, Colorado Jan 30,2012 23:26:28
17028 TELEPHONE SETS
Refer to Section 500-120-100 for
© American Telephone and Telegraph Company, !970
REFERENCE
Fig. 2-17028 Telephone Set, Rear View
Ordering Guide
2.04
Basic Telephone Set:
Set, Telephone, 1702B-
Replaceable Components:
2.05
eP-89B4- * Housing
eRinger, M1A
eDial, 25P4 or 25H4 (MD) (illuminated)
eKS-19387 (GE-259) dial lamp order by KS
number
e Handset, G3AR
•
eCord, Handset, H4CJ- *
eCord, Mounting, D5AK-*
Add appropriate color suffix.
Printed in U.S.A.
SECTION 502-702-1 00
Issue 1, March 1970
AT&TCa Standard
•
Page 1
Need help?
Do you have a question about the Plant Series and is the answer not in the manual?
Questions and answers