Contents Customizing LED Indicators ..................................3 Overview of LED Status Indicators ............................... 3 LED Indicators ......................................3 LED Indicator Pattern Types ................................3 LED Pattern Parameters ..................................4 Set an LED Pattern for Active Calls ..............................5 Set an LED Pattern for Incoming Calls ............................5 Set an LED Pattern on BLF for Held Calls ............................
• Poly Edge E500 Series, including E500 and E550 Overview of LED Status Indicators The design of LED indicators on Poly Edge E Series phones is stylish and functional. In a low-profile way, they visually alert users to key phone activity, such as held calls or voicemail.
LED Pattern Parameters The LED pattern parameters in the following list configure the pattern state, color, and duration of the LED indicators and the pattern types on Poly devices. For each parameter, specify x and a permitted value: • Specify an LED pattern using the LED pattern parameters.
Configure the LED indicator to flash when a monitored BLF line is on hold. Important: Configuring the following parameter(s) causes the phone to reboot. For more information, see the parameter reference topic(s) in the Poly Edge E Series Phones Parameter Reference Guide. Task 1 Open the configuration file.
By default, the phone blinks red for both remotely and locally held calls. You can also create a custom pattern. Important: Dependencies and overrides may affect other parameters. For more information, see the parameter reference topic(s) in the Poly Edge E Series Phones Parameter Reference Guide. Task 1 Open the configuration file.
The Headset key flashes green for headsets by default while in headset memory mode. Disable the key flashes if the user finds it distracting or bothersome. Task 1 Open the configuration file. 2 Disable the Headset key LED flashing in headset memory mode. ind.pattern.flashSlow.step.1.state="0"...
ind.pattern.<pattern type>.step.1.duration Specify the duration that the surround lighting bar is on or off for the step, in milliseconds. Depending on the pattern type, the default value varies. Min - 0 Max - 32767 ind.pattern.<pattern type>.step.1.effect Depending on the pattern type, the default value varies. Express the values in plain English, in RGB hex format (#RRGGBB), or in RGB decimal string format (RRR.GGG.BBB).
3 Save the configuration file. Default LED Configuration Parameters This section provides the default configuration parameters for LED behavior on Poly Edge E Series phones. Default Configuration Parameters for Call On-Hold Notification These default configuration parameters configure LED behavior for the call-on hold notification.
Specify the effect that the surround lighting bar uses. ChaseOnBlack (default) - Color circles around the display (on Poly Edge E300, E400, E500 Series phones) or back and forth on the LED bar (on Poly Edge E100 and E220 phones); the unlit LEDs are off. ind.pattern.haloBluetoothScan.step.1.state Specify whether the LED is on (1) or off (0) for the step.
ind.pattern.haloVoiceMail.step.1.duration Specify the duration that the LED is on or off for the step, in milliseconds. 1250 (default) ind.pattern.haloVoiceMail.step.1.color Specify the color that the LED uses for the step. Red (default) ind.pattern.haloVoiceMail.step.1.effect Specify the effect that the surround lighting bar uses. BreatheBottom (default) - The color fades out and in, starting at 100% intensity down to 0% then back to 100% in 1 cycle on the bottom part of the display.
ind.pattern.haloMute.step.1.effect Specify the effect that the surround lighting bar uses. None (default) - Solid color. ind.pattern.haloMute.step.1.state Specify whether the LED is on (1) or off (0) for the step. 1 (default) - Turns on the effect. ind.led.alert.indicateMute Specify whether the microphone mute alert state is active or inactive on the surround LED lighting bar. 0 (default) - Microphone mute alert state is inactive.
Page 13
ind.pattern.haloCallConnectedDigitalHeadset.step.1.state Specify whether the LED is on (1) or off (0) for the step. 1 (Default) - Turns on the effect. ind.led.alert.indicateDigitalHeadset Specify whether the surround lighting bar indicates that a digital headset connection is in use. 0 (Default) - The surround lighting bar does not indicate that a digital headset is connection is in use.
Need help?
Do you have a question about the Edge E Series and is the answer not in the manual?
Questions and answers