188 Internet connections
When your phone is connected to a wireless network, the Wi-Fi icon
appears in the status bar and tells you the approximate signal
strength (number of bands that light up).
The next time your phone connects to a previously accessed secured
wireless network, you won't be asked to enter the key or other
security information again, unless you reset your phone to its factory
default settings.
Connecting to a Wi-Fi network with EAP-TLS security
You may need to install a network certificate (*.p1) to your
phone before you can connect to a Wi-Fi network with EAP-TLS
authentication protocol.
1.
Save the certificate file to the root folder of the storage card.
2.
From the main Home screen, press MENU , and then tap
Settings.
3.
Tap Security > Install from SD card.
4.
Select the network certificate needed to connect to the EAP-TLS
network.
5.
Follow the steps in the previous section to connect to the Wi-Fi
network.
Checking the wireless network status
1.
From the main Home screen, press MENU , and then tap
Settings.
2.
Tap Wireless & networks.
3.
On the Wireless & networks screen, tap Wi-Fi settings, and then
tap the wireless network that the phone is currently connected
to.