Datalogic Formula F732 WIZARD User Manual page 32

5
Recharging should be made after using the terminal until
the batteries are nearly flat.
ATTENTION
Recharge the terminal by
simply inserting it into its
cradle; Datalogic
recommends
uninterrupted
time of eight hours.
When batteries are new, or
have not been recharged
for a long
necessary to perform two or
three charge and discharge
cycles (with complete use)
before the batteries are able
to reach their maximum
capacity.
NOTE
ATTENTION
26
When the F732 terminal display window
shows the message "BATTERY LOW",
wait until the F732 terminal is turned off
before inserting it in the cradle.
S.p.A.
a minimum
recharging
time, it
While the batteries are recharging, the color
of the LED on the cradle changes from red to
green. This switching takes place when 70-
80% of the complete charge is reached.
If the terminal remains inactive for a
prolonged period such as two weeks, it
is advisable to download all the stored
data onto a computer and extract the
battery pack.
is
F732 WIZARD™
Ed.: 06/01