Connecting The Flexijack Connector - HP Pavilion a6330 Getting Started

To connect the X-Fi sound card to your speakers:
1 Use the audio connection table to connect your audio system to the sound card.
2 Turn on the computer.
3 Plug in and turn on the speaker system power.
After connecting the speaker system to the sound card, follow the steps in "Configuring the
FlexiJack connector" to configure the speaker settings in the Creative Sound Blaster X-Fi
software.

Connecting the FlexiJack connector

The FlexiJack connector performs three functions:
Digital Input/Output
Line In
Microphone
You must select the function in the Creative Console Launcher.
NOTE: If you are using the FlexiJack as your Digital In connection and you want to
connect digital speakers as your output device, you will need a special connector from
Creative.
Connecting Speakers or Microphone
37